Orto alresa Magnus 22 R Low-Temperature Large-Capacity Floor Standing Centrifuge

*Please Contact Us for the Best Quote and to Confirm Delivery Time

Orto alresa Magnus 22 R Low-Temperature Large-Capacity Floor Standing Centrifuge
Speed: ≤14300rpm, Relative Centrifugal Force: ≤21948xg

Capacity: ≤4 x 750mL; Centrifugal Force/Speed: ≤21948xg / 14300rpm
The MAGNUS 22R benchtop centrifuge is widely used in laboratories, biotechnology, quality control, and medical fields. Its ergonomic design facilitates rotor disassembly and installation. The unbalanced site recognition function directly locates unbalanced sites for ease of use. Centrifugation volumes up to 750mL are suitable for microplates, cell culture plates, and centrifuge tubes of various sizes. The TFT color touchscreen display provides comprehensive information and supports programmable control. Programmable control allows for parameter setting, start-up settings, and other programmed operations, ensuring traceability of the operation process. The refrigeration system maintains the chamber temperature below 4°C under rotor and operating speed conditions.

Features:

TFT color display, viewable from over 3m

> Displays rpm/RCF, time, acceleration/deceleration digitally (PCBS), with unbalanced positioning function (ULS)

> Speed control in 10rpm/10xg increments

> Real-time RCF display based on actual usage accessories.

> Countdown or forward timing function, reaching set rpm/RCF timing function to ensure experimental reproducibility

> Timer program setting from 1min-99h, in 1s increments, with step and stop program functions

> PCBS function: Progressive control acceleration and braking system with up to 175 selectable slopes to prevent homogenization of separated samples

> ULS function: In case of unbalanced conditions, the unbalanced position number of the rotor will be directly displayed

> 40 program memory sets with password protection

> Different prompt sounds and screen information prompts, real-time display of equipment operation status

Anquan

> Anquan system for centrifuge lids

- Automatic lid locking, mechanical double lock

- Emergency lid unlocking function

- Lid locking protection during operation

- Protection against sudden lid drop

- Observation hole on the lid for operational inspection

> Automatic shutdown upon unbalanced check

> Anquan protective layer between the centrifuge chamber and the outer shell

> Centrifuge chamber is made of stainless steel (easy to clean)

> Rotor removable when lid is closed

Rotor and adapter are autoclaved for easy installation

Forced internal airflow reduces temperature rise

Green features with automatic power-off option

Easy to use

Microcomputer program control

Brushless, maintenance-free motor

Rotor and adapter memory function

Noise level below 60dB

Start, stop, lid-opening, and instant centrifugation functions

Speed adjustable via rpm/RCF during operation.

> Automatic lid opening can be programmed.

> Automatically memorizes last parameter settings.

> Automatic rotor detection and overspeed protection.

Refrigeration

> Refrigeration continues after centrifugation.

> Pre-cooling and rotor selection functions.

> Maintains a constant temperature of 4℃ at maximum speed.

> Temperature range: -20℃ to 40℃, with 1℃ temperature increments.

> Temperature sensor located inside the centrifuge chamber, providing feedback on the chamber temperature.

> R449A environmentally friendly refrigerant (CFC-free).

EU Certifications: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulations: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.