Orto alresa Digtor 22 C-U Benchtop Centrifuge

*Please Contact Us for the Best Quote and to Confirm Delivery Time

Orto alresa Digtor 22 C-U Tabletop Centrifuge
Speed: ≤3000rpm, Relative Centrifugal Force: ≤2425xg

Used for separating water and sediment from oils, and can also be used for sediment and condensate analysis. The rotor can use 6-inch and 8-inch tubes, pear-shaped tubes, and 12.5mL tubes. No heating function.

> Capacity: ≤4 x 100mL (8/6”); Centrifugal force/speed: ≤2425xg / 3000rpm

> Complies with standards: ASTM D 91, D 893, D 2273, D 2709, D 5546, API 2542, API 2548, BS 4385, DIN 51793.

> Centrifuge tubes are upright in non-centrifugal state.

> GRS: Vacuum system (optional), pre-installed.

Features: TFT color display, viewable from over 3m.

> Displays rpm/RCF, time, acceleration/deceleration digitized (PCBS) with unbalanced positioning function (ULS).

> Speed control, stepwise. 10rpm/10xg

> Real-time RCF display function based on actual usage accessories

> Countdown or forward timing function, reaching the set rpm/RCF timing function to ensure experimental reproducibility

> Timer program setting from 1min-99h, in 1s increments, with step and stop program functions

> PCBS function: Progressive control acceleration and braking system with up to 175 selectable slopes to prevent homogenization of separated samples

> ULS function: In case of unbalanced conditions, the unbalanced position number of the rotor will be directly displayed

> 40 program memory sets with password protection function

> Different prompt sounds and screen information prompts, real-time display of equipment operation status

Easy to use

> Microcomputer program control

> Brushless maintenance-free motor

> Rotor and adapter memory function

> Noise level, below 60dB

> Start, stop, lid opening, and instant centrifugation functions

> Speed adjustment via rpm/RCF during operation

> Automatic lid opening can be programmed

> Automatic memory of last parameter settings

Automatic rotor recognition, overspeed protection

Anquan

Anquan system for the centrifuge lid

- Automatic lid locking, double mechanical lock

- Emergency lid unlocking function

- Lid locking protection during operation

- Protection against sudden lid drop

- Inspection hole on the lid for operational checks

> Automatic shutdown upon unbalanced check

Anquan protective layer between the centrifuge chamber and the outer casing

Centrifuge chamber is made of stainless steel (easy to clean)

Rotor removable when lid is closed

Rotor and adapter are autoclaved, easy to install

Forced internal airflow reduces temperature rise

Green settings with automatic power-off option

EU Certifications: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.