Lovibond MINIKIT Easy Test Kit ( Please Contact Us for the Best Quote and to Confirm Delivery Time)

Please Contact Us for the Best Quote and to Confirm Delivery Time

Product Description

>Analytical Methods
The MINIKIT Simple Test Kit uses titration to quickly test component concentrations on-site.

>Tablet Counting Method
Concentration calculation is based on the number of tablets consumed. The titration solution and indicator are pre-prepared and ready for immediate use. Adding a tablet to a measured amount of water sample triggers a chemical reaction, causing a color change in the water sample; this is the titration endpoint. The testing range can be extended by changing the volume of the water sample.

>Rapid Test
Based on back titration, a tablet is added to a sample of known concentration, followed by slow addition of the water sample to be tested until a color change occurs (e.g., from red to blue); this is the titration endpoint. The component concentration can be calculated from the volume of water sample added.

>Qualitative Test
This is very simple; it provides a basis for judgment, determining whether a water sample contains a certain component, or whether the concentration of a specific component exceeds or falls below a set concentration limit.

Turbidity Method: When water sample and test tablet are added to a specific two-tube standard sample tube, a precipitation reaction occurs, causing the solution to become turbid. The degree of turbidity is related to the concentration of the components. During testing, first add 20 ml of water sample to the outer tube, then add one tablet. After 2 minutes of precipitation, push the inner tube in. There is a black dot at the bottom of the inner tube. Move the inner tube up and down until the black dot is no longer visible; this position corresponds to the concentration mark.